Xpress Precision Engineering, metrology, optics and precision machine design.

Home > Contact us > Route description


Route description


XPRESS Precision Engineering has its offices in two locations at the campus of the Eindhoven University of Technology.


Please check your destination location with us before your visit.


Main building

XPRESS Precision Engineering
Horsten 1
5612 AX Eindhoven
The Netherlands
Find in Google maps

Research facilities

XPRESS Precision Engineering
de Wielen 2
5612 AV Eindhoven
The Netherlands
Find in Google maps


Getting there by plane

You can get direct flights to Eindhoven Airport (Welschap) from various cities in Europe: Amsterdam, Maastricht, London, Birmingham, Manchester, Paris, Zurich, Frankfurt, Hamburg and Strassbourg.


Getting there by train

Eindhoven Central Station, take the stairs down from the platform and turn to your right. Take the exit on the north side, facing the bus station. Walk for about 25 meters to the right and you will see the university buildings within a few minutes walk. Cross the street at the traffic light and follow the winding footpath.


Getting there by car

There are plenty of parking places in the vicinity of various buildings. At a charge you can park here. From all motorways to and around Eindhoven (A2, A50, A58, A67 en A270) follow the road signs with 'Centrum' until 'Universiteit' is indicated. There is sufficient parking space on campus.

From ’s-Hertogenbosch, Motorway A2/N2:
At the intersection ‘Ekkersweijer’ take the motorway A58 and follow the signs ‘Centrum’. Keep driving in this direction. Soon after the signs with the word ‘universiteit’ will appear. After crossing the ringroad ‘Ring’ you see the sign ‘universiteit’. Take the turn-off to the left.

From Maastricht, Motorway A2 and from Venlo or Antwerpen, Motorway A67:
At the intersection Leenderheide you follow the signs ‘Centrum/Tongelre’. When you arrive in Eindhoven, you take the second exit on the roundabout. Go straight on. At the second set of traffic lights you follow the signs ‘Nijmegen/’s-Hertogenbosch’. Keep driving in this direction (across a canal and under a railway). Soon after that signs with the word ‘universiteit’ will appear. Immediately after the next roundabout you see the sign ‘universiteit’. Take the turn-off to the left.

From Tilburg, Motorway A58:
At the intersection ‘Batadorp’ you take the exit ‘Randweg Eindhoven(Noord)/Centrum’ and at the intersection ‘Ekkersweijer’ the exit ‘Randweg Eindhoven/ Centrum’. Then you keep following the signs with ‘centrum’ (motorway A58). After crossing the ringroad ‘Ring’ you see the sign ‘universiteit’. Take the turn-off to the left.

From Nijmegen, Motorway A50:
At the end of the motorway A50, at Ekkersrijt, you drive straight ahead. Then follow the signs ‘Centrum’ and after that ‘universiteit’. Directly after crossing the ringroad (‘ring’) you see a signpost pointing you in the direction of ‘universiteit’ (to the left).

From Helmond, Motorway A270:
When you arrive in Eindhoven, take the first exit on the roundabout towards ‘Ring/universiteit/’s-Hertogenbosch/ Tilburg’. After this roundabout you see the sign ‘universiteit’. Take the turn-off to the left.


On the campus

XPRESS Precision Engineering is located at the Multimedia Pavilion on the University campus, as indicated on the map below. The direction of the train station and entry points by car are marked.


A route description is also available from the University website.

Overview of pages in the media section of the Xpress Precision Engineering site
Contact us
Route description

Search XpressPE.com
Home | Terms of use | Sitemap | Contact Us
Copyright © 2009 by XPRESS All Rights Reserved